Tool & Software (79 in all)
Introduction：This programming software is based on the chip's internal bootloader, with communication interfaces supporting UART and USB, enables basic operations such as programming, erasing, and reading of the MCU's Flash and option bytes.
Introduction：Contains the following files, details are as follows:
(For GD32F3x0)
1.GigaDevice.GD32F3x0_AddOn.3.3.0.exe, supports Keil v4.7x.
2.GigaDevice.GD32F3x0_DFP.3.3.0.pack, supports Keil v5.27 and above.
3.IAR_GD32F3x0_ADDON.3.3.0.exe, supports IAR v8.32.1 and above.
Introduction：GD32E502 standard firmware library is suitable for GD32E502 series MCU. The library is compatible with the CMSIS (Cortex®-M Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.
Introduction：GD32A513 standard firmware library is suitable for GD32A513 series MCU. The library is compatible with the CMSIS (Cortex-M Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.
Introduction：GD32A50x standard firmware library is suitable for GD32A503 series MCU. The library is compatible with the CMSIS (Cortex-M Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.
Introduction：There are 2 files in the zip file, details are as follows:
(For GD32A508xx series)
1. GigaDevice.GD32A508_DFP.1.8.0.pack, addon files used to support keil ver 5.28 or later .
2. IAR_GD32A508_ADDON_1.0.0.exe, addon files used to support IAR ver 8.32 or later.
Introduction：GD32A508 series EVAL board routines and user guide. The Demo Suites can support GD32A508V_START board, GD32A508Z_EVAL board.
Introduction：Embedded Builder is a C-language integrated development environment (IDE) of GD32MCU. User can configure peripherals graphically, the IDE can generate code, compile project and debug.
Introduction：ISP console tool under Linux system, used for serial port and USB burning GD MCU Flash data.
Introduction：GD32H75E standard firmware library is suitable for GD32H75E series MCU. The library is compatible with the CMSIS (Cortex-M Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.
Introduction：There are 2 files in the zip file, they are used to support the development of GD32H75E applications in Keil and IAR ,
details are as follows:
1. GigaDevice.GD32H75E_DFP.1.0.0.pack, addon files used to support keil ver 5.29 or later
2.IAR_GD32H75E_ADDON_1.0.0.exe, addon files used to support IAR ver 8.32 or later
Introduction：GD32G5x3 standard firmware library is suitable for GD32G5x3 series MCU. The library is compatible with the CMSIS (Cortex-M Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.
Introduction：There are 2 files in the zip file, they are used to support the development of GD32G5x3 applications in Keil and IAR,
details are as follows:
1. GigaDevice.GD32G5x3_DFP.1.0.0.pack, pack files used to support keil ver 5.27 or later
2. IAR_GD32G5x3_ADDON.1.0.0.exe, addon files used to support IAR ver 8.32 or later
Introduction：GD-Link programmer is a tool to program GD series MCU, With GD-Link programmer, user can download the application program to MCU’s internal flash memory, set read and write protection, etc. And the programmer also supports GD-Link offline download function.
Introduction：ISP console tool under Windows system, used for serial port and USB burning GD MCU Flash data.
Introduction：There are 2 files in the zip file, they are used to support the development of GD32E23x applications in Keil and IAR ,
details are as follows:
1. GigaDevice.GD32E23x_DFP.2.2.2.pack, pack files used to support keil ver 5.27 or later
2. IAR_GD32E23x _ADDON.2.2.0.exe, addon files used to support IAR ver 8.2 or later
Introduction：GD32A508 standard firmware library is suitable for GD32A508 series MCU. The library is compatible with the CMSIS (Cortex-M Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.
Introduction：GDemWin GUI middleware in GD32H7xx series.
Introduction：GDemWin GUI middleware in GD32F5xx series.
Introduction：GDemWin GUI middleware in GD32F4xx series.
Introduction：There are 2 files in the zip file, details are as follows:
1. GigaDevice.GD32F5xx_DFP.1.1.0.pack, addon files used to support keil ver 5.28 or later .
2. IAR_GD32F5xx_ADDON_1.1.0.exe, addon files used to support IAR ver 8.32 or later.
Introduction：GD32F5xx standard firmware library is suitable for GD32F527 series MCU. The library is compatible with the CMSIS (Cortex-M Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.
Introduction：Include three installer files as below：
1. GigaDevice.GD32A10x_DFP.1.1.0.pack support Keil Version 5.27 and above
2. IAR_GD32A10x_ADDON.1.0.1.exe support IAR Version 7.4 and above
Introduction：GD32VW553 Wi-Fi & BLE SDK
Introduction：GD32A10x standard firmware library is suitable for GD32A103 series MCU. The library is compatible with the CMSIS (Cortex-M Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.
@2025 ALL RIGHTS RESERVED
