Application Note (26 in all)
Introduction：AN109 is designed to describe the hardware development of GD32H7xx series products, so as to allow developers to quickly get started and use GD32H7xx series products.
Introduction：AN111 describes the module usage precautions when developing on GD32H7xx MCUs.
Introduction：AN191 Introduces the Precautions to be Taken in the Hardware Layout of the GD32 MCU.
Introduction：AN181 introduces the I2C noise filter of the GD32 MCU and the calculation of related hold and setup times.
Introduction：AN092 is designed for engineering designers based on GD32 MCU development, and mainly introduces the functional configuration of GPIO, the internal structure, and the precautions when using in different scenarios
Introduction：AN206 is mainly for GD32H7xx series, scatter loading instruction in Keil.
Introduction：AN192 describes how to use GD32 MCU for spreading frequency testing, and uses GD32F470 as an example to introduce the relevant operation steps and their impact.
Introduction：AN95 aims to guide customers on ways to improve the accuracy of GD32 MCU temperature sensors.
Introduction：AN163 provides some EMC protection design references for MCU hardware design, aiming to help optimize the EMC performance of MCU in the product application process.
Introduction：AN166 mainly introduces the thermal characteristics and temperature management solutions for GD32H7 in high-performance, high-power-consumption scenarios.
Introduction：AN118 introduces the use process and method of GD32H7xx series Licensed Firmware Installation (LFI), and also introduces the operation process of related software.
Introduction：AN122 introduces the GD32H7xx OSPI methods, related tools, software and precautions.
Introduction：AN142 introduces the sources and some improvement methods of EMC in motors and their drive systems, helping users quickly understand and optimize key circuits in the drive system.
Introduction：AN164 introduces the principle of Dhrystone and the porting method on GD32 MCU.
Introduction：GD32H7 Series Overview of Secure startup describes the Secure Boot Process, Secure Boot Code, Signature Verification Process, and User’s Boot Image Verification Process.
Introduction：AN125 introduces MCU chip-level RE test methods and precautions to help users quickly understand chip-level RE test.
Introduction：AN121 helps user fully understand security architecture of the GD32H7xx series MCU, including secure features, secure install and update solution, secure boot and secure mode.
Introduction：AN159 describes the differences between MCU chip-level ESD and system-level ESD within test methods and test levels, helping users to clarify the irrelevance between chain-level ESD and system-level ESD.
Introduction：AN065 introduces how to port FATFS file system based on GD32 MCU.
Introduction：AN113 introduces the knowledge of the GD32H7xx series secure storage management. To allow developers to quickly understand the security mode of the GD32H7xx and the use of basic security services.
Introduction：AN128 introduces MCU system-level EFT test method, experiment implementation details and precautions to help users quickly understand the meaning of EFT parameters and test details in the datasheet.
Introduction：AN127 introduces MCU system-level ESD test method, experiment implementation details and precautions to help users quickly understand the meaning of ESD parameters and test details in the datasheet.
Introduction：AN089 introduces the design principle and usage of TouchKey software library, which can help developers quickly use TouchKey software library for configuration and development.
Introduction：AN117 It describes the precautions to be paid attention to when using GD32H7xx series USBHS peripheral, including clock configuration, GPIO configuration, PHY configuration and power configuration. The purpose of this application note is to allow developers to quickly understand how to use the GD32H7xx series USBHS peripheral correctly.
Introduction：AN126 describes the precautions to be paid attention to when using bootloader, mainly including operation at the level of security and protection. The purpose of this application note is to prevent the chip lock due to wrong operation.
@2024 ALL RIGHTS RESERVED
