User Manual (25 in all)
Introduction：AN051 is designed to help users better solve ESD problems by choosing the right TVS model.
Introduction：GD-Link V2 programming and debugging tool user guide. Application to the entire GD32 MCU series.
Introduction：GD32VF103xx series MCU user manual of GD32VF103.
Introduction：GD-Link programming and debugging tool user guide. Suitable for GD32F1/GD32F2/GD32F3/GD32F4/GD32E1/GD32E2/ GD32E5/GD32W5/GD32L2/GD32VF1 series MCU
Introduction：AN060 aims to introduce the definition, measurement and calculation methods of thermal resistance, as well as some heat dissipation measures to help users solve the problem of device overheating during design.
Introduction：AN055 aims to introduce ESD operation precautions during the use of GD32 MCU, so as to help customers avoid ESD/EOS interference during development and debugging.
Introduction：AN050 aims to analyze the firmware library architecture of the USBFS and USBHS modules, and briefly describe the functions of the firmware library functions, to provide reference for customers’ development.
Introduction：AN014 application note describes how to configure and develop a GD32 MCU project using the Arduino IDE.
Introduction：AN033 describes how to use makefile to manage the whole MCU code project in Linux environment. You can specify files or modules for compilation.
Introduction：AN041 is an application note about how to realize the program jumping from Bootloader to APP. Applicable to GD32 ARM core series MCU.
Introduction：AN043 application note introduces how to measure the GD32 MCU flash operating time, including mass erasing time, page erasing time, and word programming time. Take GD32L23x MCU as an example.
Introduction：AN044 application note introduces how to calibrate the internal IRC8M by using LXTAL in the GD32F10x. The application note can also be applied in other series of GD32 MCU.
Introduction：AN017 provides two programming methods for problems that require downloading data to SPI Nor Flash during development. Applicable to the full range of GD32 MCUs.
Introduction：AN020 is an application note on how to use CmBacktrace to track errors on the GD32 chip.
Introduction：AN021 provides four common methods for measuring code execution time on MCUs during development. Applicable to the full range of GD32 MCUs.
Introduction：AN022 is an application note that introduces how to map 0xC0000000 to 0x00000000 to run the program on GD32 MCU that supports address mapping.
Introduction：AN023 is an application note on how to port and test Letter shell on the GD platform.
Introduction：AN041 is an application note about how to use Eclipse for GD32 MCU development. Applicable to GD32 ARM core series MCU.
Introduction：Nuclei Studio IDE usage explanation folder shows how to use Nuclei Studio and GD32VF103xx RISC-V MCU series.
Introduction：none
Introduction：Application note of programming flash memory.
Introduction：Application note to explain the silicon limitations of GD32F1 series device know at the release date of the document.
Introduction：Application note to introduce the use-method of GD32F150xx TSI (Touch Sensor Interface) module.
Introduction：Application note of GD32F10xxx ADC.
Introduction：Application note to explain how to migrate the software from different MCU platform to GD32F103xx.
@2024 ALL RIGHTS RESERVED
